Altera SDI Audio IP Cores - Manual (Page 34)

Video Status Register
Reports the detected video input standard.
• Bits[7:5] = Picture structure code. Defined values for
picture structure code are:
• 001b = 486 or 576 line SD-SDI
• 100b = 720 line HD-SDI
• 101b = 1080 line HD-SDI
• 010b = 1080 line 3G-SDI
• 011b = 1080 line 3GA-SDI
• 110b = 720 line 3GA-SDI
• 111b = 720 line 3GB-SDI
• Bit[4] = 0b—Interlace or segmented frame,
1b—Progressive.
• Bits[3:0] = Frame rate code. Defined values for frame
rate code (in Hz) are:
• 0010b = 23.97
• 0011b = 24
• 0101b = 25
• 0110b = 29.97
• 0111b = 30
• 1001b = 50
• 1010b = 59.94
• 1011b = 60
RO Active channel 7:0
SD EDP Control Register
Enables the embedding of SD-SDI Extended Data
Packets (EDP) for each audio group. RW Enable SD EDP 3:0
Enables the embedding of SD-SDI Audio Control
Packets (ACP) for each audio group. RW Enable SD ACP 7:4
Channel Status Control Register
When set to 00b, the core keeps the existing channel
status data.
When set to 01b, the core replaces the channel status
data with default values.
When set to 10b, the core replaces the data with the
contents of the appropriate channel status RAM.
The following bits correspond to the number of audio
groups you specify:
• Bit [1:0] = Audio group 1
• Bit [3:2] = Audio group 2
• Bit [5:4] = Audio group 3
• Bit [7:6] = Audio group 4
RW CS mode select 7:0
Altera Corporation SDI Audio IP Registers
Send Feedback
5-3 SDI Audio Embed Registers
UG-SDI-AUD
2014.06.30