TOYOTA 2010 Highlander User Manual
Page 195
212
2-4. Using other driving systems
■
Cruise control can be set when
●
2.7 L 4-cylinder (1AR-FE) engine: The shift lever is in D, 4, 5 or 6 range
of S.
●
3.5 L V6 (2GR-FE) engine: The shift lever is in D, 4 or 5 range of S.
●
Vehicle speed is above approximately 25 mph (40 km/h). Within the limits
of the engine’s capabilities, cruising speed can be maintained on up or
down grades.
■
Accelerating
The vehicle can be accelerated normally. After acceleration, the set speed
resumes.
■
Adjusting the speed setting
Increase speed
Decrease speed
Hold the lever until the desired
speed setting is obtained.
Fine adjustment of the set
speed can be made by lightly
pushing the lever up or down
and releasing it.
■
Canceling and resuming regular acceleration
Cancel
Push the lever towards you to
cancel cruise control.
The speed setting is also can-
celed when the brakes are
applied.
Resume
To resume cruise control and
return to the set speed, push
the lever up.