TOYOTA 2010 Highlander - Manual (Page 388)

407
3-7. Other interior features
3
Inte
rior fe
atures
Press and hold down one of the
buttons on the HomeLink
®
and
the button on the transmitter.
When the indicator light on the
HomeLink
®
changes from a slow
to a rapid flash after 20 seconds,
you can release both buttons.
Test the operation of the
HomeLink
®
by pressing the
newly programmed button.
If programming a garage door
opener, check to see if the garage
door opens and closes. If the
garage door does not operate,
see if your garage transmitter is
of the Rolling Code type. Press
and hold the programmed
HomeLink
®
button. The garage
door has the rolling code feature
if the indicator light (on the
HomeLink
®
) flashes rapidly for 2
seconds and then remains lit. If
your transmitter is the Rolling
Code type, proceed to the head-
ing “Programming a rolling code
system”.
Repeat the steps above to program another device for each of
the remaining HomeLink
®
buttons.
STEP 2
STEP 3
STEP 4