TOYOTA 2010 Highlander User Manual
Page 421
Advertising
441
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
3.5 L V6 (2GR-FE) engine
Low
Full
■
Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.
Make sure to check the oil type and prepare the items needed before
adding oil.
Remove the oil filler cap.
Add engine oil slowly, checking the dipstick.
Install the filler cap, turning it clockwise.
The approximate quantity of oil needed to raise the level from low to full on
the dipstick is indicated as follows:
1.6 qt. (1.5 L, 1.3 lmp. qt.)
Oil grade
ILSAC multi-grade engine oil
Items
Clean funnel
STEP
1
STEP
2
STEP
3
Advertising