AXING SKQ-40-0x - Manual (Page 11)

2015-06-07 | © AXING AG Switzerland | We assume no liability for design changes, type changes, errors and misprints 11
3.1. Login
The configuration screen of the SKQ x0-0x is password-protected.
Enter the default password Ramsen8262. Press the Enter password button and then the Open page button.
This will open the start page.
The web interface is opened in English language by default. The desired language can be selected in the top
right corner of the screen.
Important: Closing the web browser leads to an automatic logout after approx. 2.5 minutes.
Changing the IP address
The IP address, net mask and gateway can be changed in the menu entry Maintenance > System Options. The
Save Changes button confirms and saves the changes. For information on how to change the IP address, see
section 3.6.22.
Changing the password
The default password should be changed right after commissioning the module. The default password can be
changed under the menu entry Maintenance > Set New Password.
For information on how to change the password, see section 3.6.33.