AXING SKQ-40-0x - Manual (Page 17)

2015-06-07 | © AXING AG Switzerland | We assume no liability for design changes, type changes, errors and misprints 17
Then the enter password site will be displayed and the user must log in with the new password.
3.6.4. Rebooting
Clicking on the Reboot button reboots the module. After rebooting, the password must be entered again.
Note: If SAT signals are temporarily unavailable (e.g. due to snow), the module will reboot every 10 minutes.
This ensures that all configured programs will be available once the signal becomes available again.
3.6.5. Erasing service data
Clicking the Erase Service Data button will erase the tuner settings from phase 2.
The set transponder data must be read again for tuners 1-4 by executing a scan.