AXING SKQ-40-0x - Manual (Page 3)

2015-06-07 | © AXING AG Switzerland | We assume no liability for design changes, type changes, errors and misprints 3
Safety messages
 Assembly, installation and service must be carried out by authorized and skilled electricians.
 Switch off facility operating voltage or pull out mains plug before starting assembly or service work.
 Facility assembly:
In dust-free, dry environment, protected against humidity, vapors, splash water and moisture.
In a location protected against solar radiation. Not within close distance of heat sources.
In ambient temperatures of <50°C.
 Ensure sufficient ventilation of the device. Do not cover the ventilation slots! - Prevent short circuits!
 Damages arising from incorrect connection and/or improper operation are excluded from any liability.
 Please observe all relevant standards, regulations and guidelines regarding installation and operation of
antenna facilities.
 Ground SAT earth stations using the equipotential bonding rail according to EN 50083-1, EN 60728-
11:2010.
 Do not carry out any installation and service work during thunderstorms.