2 electrical connection, Caution – BINDER KB 23 User Manual

Page 24

Advertising
background image

KB (E3.1 + E5.1) 11/2014

page 24/100

4.2 Electrical connection

The cooling incubators KB are supplied ready for connection.

The cooling incubator KB (E3.1) comes with a fixed power connection cable that has a length of 1800

mm / 5.9 ft and is equipped with a semi time-lag fine-wire fuse.

The cooling incubator KB (E5.1) comes with a fixed power connection cable that has a length of 1800

mm / 5.9 ft.

Model

Power plug

Voltage

+ /-10 %

Current

type

Power

frequency

Unit fuse

KB 23 (E3.1)

Shock-proof plug

230 V

1N~

50/60 Hz

10 Amp

KB 53 (E3.1)

KB 115 (E3.1)

Shock-proof plug

230 V

1N~

50 Hz

10 Amp

KB 23-UL (E3.1)
KB 53-UL (E3.1)

KB 115-UL (E3.1)

NEMA 5-15

115 V

1N~

60 Hz

12,5 Amp

KB 240 (E5.1)

Shock-proof plug 200 V to 240 V

1N~

50 Hz

16 Amp

KB 400 (E5.1)
KB 720 (E5.1)

Shock-proof plug 200 V to 240 V

1N~

50/60 Hz

16 Amp

KB 240-UL (E5.1)

NEMA 5-20P

100 V to 120 V

1N~

60 Hz

16 Amp

KB 400-UL (E5.1)

NEMA 5-20P

100 V to 120 V

1N~

50/60 Hz

16 Amp

KB 720-UL (E5.1)

NEMA 6-20P

200 V to 240 V

2 ~

50/60 Hz

16 Amp

The socket must also provide a protective conductor.

Prior to connection and start-up, check the power supply voltage. Compare the values to the specified

data located on the unit’s type plate (left unit side, bottom right-hand, see chap. 1.4).

When connecting, please observe the regulations specified by the local electricity supply company as

well as the VDE directives (for Germany). We recommend the use of a residual current circuit breaker.

Pollution degree (acc. to IEC 61010-1): 2

Over-voltage category (acc. to IEC 61010-1): II

CAUTION

Danger of incorrect power supply voltage.
Damage to the equipment.

Check the power supply voltage before connection and start-up.

Compare the power supply voltage with the data indicated on the type plate.

See also electrical data (chap. 20.4).

To completely separate the unit from the power supply, you must disconnect the power plug.

Install the unit in a way that the power plug is easily accessible and can be easily pulled in case

of danger.

Advertising
This manual is related to the following products: