BINDER MK 53 User Manual

Operating manual, Apt.line™ mk (e2.1), Alternating climate chamber with program control

Advertising

Table of contents

Document Outline

EC – Declaration of Conformity
Product registration
1. Safety
- 1.1 Legal considerations
- 1.2 Structure of the safety instructions
- 1.3 Localization / position of safety labels on the unit
- 1.4 Type plate
- 1.5 General safety instructions on installing and operating the alternating climate chamber MK
- 1.6 Intended use
2. Unit description
- 2.1 Unit overview
- 2.2 Instrument box MK
- 2.3 Lateral control panel MK
3. Completeness of delivery, transportation, storage, and installation
- 3.1 Unpacking, and checking equipment and completeness of delivery
- 3.2 Guidelines for safe lifting and transportation
- 3.3 Storage
- 3.4 Location of installation and ambient conditions
4. Installation and connections
- 4.1 Electrical connection
5. Start up
- 5.1 Function overview of display program controller MB1
- 5.2 Operating modes
- 5.3 Behavior after power failure
- 5.4 Performance when opening the door
- 5.5 Turning on the unit
6. Controller MB1 settings
- 6.1 Selection of the menu language
- 6.2 Overview of program controller MB1 displays
- 6.3 Menu settings in the “User-settings” menu
- 6.4 Menu settings in the “User Level” menu
7. Graphical representation of the historical measurement (chart recorder function)
- 7.1 Setting the storage rate
8. Manual Mode
- 8.1 Set-point entry
- 8.2 Performance after power failure in Manual Mode
9. Program operation
- 9.1 Overview menu-based program entry
- 9.2 Selecting between set-point ramp and set-point step
- 9.3 Program entry as set-point ramp or as set-point step
- 9.4 Information on programming different temperature transitions
- 9.5 Repetition of a section or several sections within a program
- 9.6 Performance after power failure in Program Mode
- 9.7 Starting a previously entered program
- 9.8 Deleting a program
- 9.9 Temperature profile and operation lines template
- 9.10 Program table template
10. Bedew protection facility (operation line 1)
11. Temperature safety devices
- 11.1 Over-temperature protective device (class 1)
- 11.2 Safety controller (over-temperature safety device class 2)
- 11.3 Over/under temperature safety device class 2 (option)
12. Notification and alarm functions
- 12.1 Notification and alarm system overview (auto diagnosis system)
- 12.2 Resetting the notifications or alarm messages
13. Notes on refrigerating operation
14. Options
- 14.1 Communication software APT-COM™ 3 DataControlSystem (option)
- 14.2 Analog output for temperature (option)
- 14.3 Keyboard locking (option)
- 14.4 Data logger kit
- 14.5 Additional measuring channel for digital object temperature indicator with flexible temperature sensor Pt 100 (option)
15. Maintenance, cleaning, and service
- 15.1 Maintenance intervals, service
- 15.2 Cleaning and decontamination
  - 15.2.1 Cleaning
  - 15.2.2 Decontamination
- 15.3 Sending back the unit to the BINDER GmbH
16. Disposal
- 16.1 Disposal of the transport packing
- 16.2 Decommissioning
- 16.3 Disposal of the unit in the Federal Republic of Germany
- 16.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
- 16.5 Disposal of the unit in non-member states of the EC
17. Troubleshooting
18. Technical description
- 18.1 Factory calibration and adjustment
- 18.2 Over-current protection
- 18.3 Definition of usable volume
- 18.4 Technical Data MK 53 (E2.1)
- 18.5 Equipment and options MK 53
- 18.6 Accessories and spare parts MK 53
- 18.7 Heating-up and cooling-down graphs
- 18.8 Heat compensation
- 18.9 Dimensions MK 53
19. Contamination clearance certificate
- 19.1 For units located outside North America and Central America
- 19.2 For units in North America and Central America

Popular Brands

Popular manuals