Casella CEL CEL-62X - Manual (Page 18)

Casella CEL Limited 18
J. RUN SCREENS (Refer to Figure 12)
The Instrument has four Run screens: The Main screen, the Graph screen, the
Octaves screens and the Octaves Values screen, the last two of which are only
available on the CEL-62XB and CEL-62XC.
Switch ON the instrument as detailed in Figure 3.
CEL-62XA – Press the RUN/STOP Key (D) to go to the Graph screen.
CEL-62XB and CEL-62XC– OCTAVE screen. Press the RUN/STOP Key (D) to go to
the Octaves screen (or 1/3 Octave on CEL-62XC model).
All CEL-62X Models – The “Play” symbol is displayed in the top left hand corner of
the screen. The “Pause” symbol is in the bottom left hand corner of the screen. The
left hand Soft Key (A) is the PAUSE/RUN feature. When Pause is selected,
‘PAUSED!’ will be displayed on the screen. The incremental run number and duration
are displayed in the top right hand corner of the screen. If the Run Duration Timer is
set, a ‘stopwatch’ icon will appear next to the countdown timer. The Run Duration
timer is enabled and disabled in SETTINGS (Refer to Figure 8). If the Run Duration is
not set, the digital timer will count up until the run is stopped manually (by pressing
D).
Figure 12 Run Screens
CEL-62XA (Refer to Figure 13). The broadband values can be viewed as a
bargraph on the Main screen, or as a graphical time history on the Graph screen.
Pressing View key (B) toggles between Graph and Main screens.