CIRCUTOR CEM-C30 series - Manual (Page 13)

4�- OPERATION
The CEM-C30 is an energy meter capable of measuring:

Imported and exported active energy and reactive energy in the four quadrants.
(according to version).
 Active, reactive and apparent power (according to version).
 RMS voltage and current
 Power factor, PF
4.1.- BUTTON FUNCTIONS
The CEM-C30 has 2 buttons that allow you to browse the different screens and program the
unit.
The
button can be sealed to prevent access to the programming of the most relevant pa-
rameters.
To seal the button, insert the seal through the slot found under the
button, Figure 6 .
ESCALA 2:1
ESCALA 2:1
Figure 6: Sealing the button�
Button functions on the measuring screens ( Table 5 ):
Table 5: Button functions on measuring screens�
Button Short press Long press (> 2 s)
For the cyclic movement.
Next screen.
Enters reading mode.
Enter the programming menu -
13 Instruction Manual
CEM-C30