Display – CIRCUTOR CEM-C30 series User Manual
Page 14
4.2.- DISPLAY
The unit has an LCD where all parameters are displayed.
The display is divided into three areas (
):
Figure 7: CEM-C30 Display areas
Data line, displaying the values measured by the unit.
Units, where the unit of the magnitude being viewed is shown.
Indicators, which shows other parameters:
Indicates that the energy being viewed is generated.
Indicates that the energy being viewed is consumed.
Indicates that the energy is inductive.
Indicates that the energy is capacitive.
COM, indicates that there is a communications module connected. It flashes when the
communications are established.
L1 - L2 - L3 - Indicates the presence of voltage in each phase, with its corresponding
current direction:
“
- “ is used to show the power yielded to the network.
“ “ is used to show the power absorbed by the network.
14
CEM-C30
Instruction Manual