Display in reading mode – CIRCUTOR CEM-C30 series User Manual
Page 18
Advertising
4�4�2� DISPLAY IN READING MODE
The reading mode is activated by a long press on the
button.
In reading mode you can:
View the voltage, current, active power, apparent power and power factor of the
installation.
View the energies of the partial energy meters.
Enter the setup menu.
View the manufacturer information.
The navigation diagram is shown in
:
Figure 9: Navigation diagram in reading mode of the CEM-C10�
Note: PC is a short press on the
button (< 2 seconds).
PL is a long press
(> 2 seconds).
18
CEM-C30
Instruction Manual
Advertising
This manual is related to the following products: