CIRCUTOR CEM-C30 series - Manual (Page 22)

Table 8 ( Continuation ) : Partial energy screens�
Screen Parameters
Partial reactive energy, quadrant 3 (C -) (1)
Only displayed in the 4-quadrant version.
Partial reactive energy, quadrant 4 (C +) (1)
Hours in partial operation
(since the last partial reset )
Cost of the partial active energy consumed
(since the last partial reset ) (2)
CO
2
emissions into the atmosphere.
(since the last partial reset ) (2)
( 1) Only displayed if the reactive energy display option has been selected in the setup menu (see “ 4.7.6.
Display” )
(2) Only displayed if the efficiency factors display option has been selected in the setup menu (see
“ 4.7.6. Display”)
22
CEM-C30
Instruction Manual