CIRCUTOR AFQ Series - Manual (Page 70)

AFQ-4W
70 Instruction Manual
5.- Unscrew the compartment cover fasteners with a no. 20 Torx key and remove
the cover. ( Figure 72 ).
Figure 72: Unscrew the cover fasteners
6.- Disconnect the power supply fans by firmly grasping the terminal and pulling
to disconnect it. ( Figure 73 )
Figure 73: Disconnect the power supply from the fans.
7.-Take out the fan being changed using a socket spanner or 7 mm spanner to
hold the rear nut and a flat or Phillips screwdriver to loosen the screw. ( Figure
74 )
Figure 74: Remove the fan.