CONTA-CLIP SMS-MULTI I/O - Manual (Page 13)

SMS-MULTI-IO
- 12 -
4 4 4 4
Configuration
Configuration Configuration Configuration
4.1 4.1 4.1 4.1
Connect to the SMS
Connect to the SMS Connect to the SMS Connect to the SMS----MULTI MULTI MULTI MULTI----IO IO IO IO
First connect the USB programming cable between the SMS-MULTI-IO and a PC USB port. Connect
24VDC to the module. Now start the SMS-MULTI-IO configuration software.
On start-up the configuration software searches all available COM ports for an available SMS-MULTI-
IO. If found the software prompts to download the settings from the device. This action will take
about 20 seconds, the user interface will be automatically updated.
If no device is found check the COM settings: select Edit->COM settings.
Make sure the baud rate is 115200bps and NO parity selected.