Proceed CDD - Manual (Page 20)

20
Remote Control, CDD
1 IR TRANSMITTER WINDOW
The CDD’s Remote Control sends infrared (IR) commands through its pro-
jection lens, and the CDD receives IR commands through its Remote sensor
window. (See “Front Panel, CDD”). If either of these lenses is obstructed,
no IR commands can be received by the CDD. If you notice IR perfor-
mance deteriorating, you may want to clean these lenses with a soft cloth
and some glass cleaner. (Spray the cleaner on the cloth first, and then wipe
the lens with the moistened cloth. Do not spray the cleaner directly on ei-
ther lens, as this may allow moisture to migrate into the electronics behind
the lens assemblies.)
2 TRANSPORT BUTTONS
The buttons used for routine operation of transport functions on the CDD
are grouped at the top of the remote control. They include:
( /dwr ) stop/dwr : Press to stop play. The same button will operate
the drawer if stopping the disc has no relevance (e.g., if it is al-
ready stopped, or if there is no disc inside the CDD).
( / ) previous/rewind : When pressed and released quickly, this
will take you to the beginning of the current track; when pressed
repeatedly, this button will step you backwards through the previ-
ous tracks, one at a time. ( is the international symbol for previ-
ous). When pressed and held, the CDD will enter a reverse au-
dible scanning mode similar to the familiar rewind function of
many cassette decks, allowing a precise location within a track to
be located.
( / ) play/pause : Press to enter the play mode from either stop ,
pause or standby , or to restart play at the beginnning of the
track currently playing. When in play mode, press to pause play
in the current location. If left in pause mode for more than two
minutes, the CDD will enter extended pause mode, shutting
down both the laser and the drive motors to enhance longevity
and reliability. Upon pressing
pause or play a second time, the
disc will spin up and begin playing from the location where it
had been paused.
( / ) next/fast forward : When pressed and released quickly, this
will take you to the beginning of the next track. ( is the interna-
tional symbol for next). When pressed and held, the CDD will
enter a fast forward audible scanning mode similar to the familiar
fast forward function of many cassette decks, allowing a precise
location within a track to be located.
R PR O C E E D
■/dwr / / /
1 2 3
4 5 6 prog+
7 8 9 prog–
0 time index
dispoff repeat rpt a/b rndm
select up display
mute down standby
2
3
4
1
5
6