Proceed CDD - Manual (Page 30)

30
remaining in the playlist. This next track will be shown with the
green
program LED lit to indicate that it is still in the playlist.
4. Using next and previous , move to any other tracks you would pre-
fer to skip, pressing program – to eliminate each track from the
playlist. Once you are in the program mode, the green
program LED will illuminate to indicate a track is in the playlist,
and extinguish for any track omitted from the playlist.
Reviewing a Playlist To review your playlist before playing it:
1. Assemble a playlist and press stop .
2. Without selecting any particular track (while the playlist’s total
number of tracks and total playing time are displayed), press pro-
gram + . The display will show the first selection in your playlist.
3. To view the next selection, press program + again, and so on.
4. After you view the last selection, one more press of program + will
cause the display to “wrap around” to the first track in the playlist.
(Alternatively, you may use the next and prev buttons to step
through all the tracks, noting which tracks are included in the pro-
gram by watching for the green
program LED .)
Adding a Track
to a Playlist
You also may add a selection to the end of a previously assembled playlist. To do
so:
1. From stop, using the next and previous (or the numbered buttons
on the Remote Control), select the track you want to add to your
playlist.
2. Add the selection to your playlist by pressing program + .
3. Repeat steps 2 and 3 for each selection you want to add to your
program. Make sure to press program + after each selection.
Deleting a Track
from a Playlist
You may delete any selection from a playlist. To delete a selection:
1. Press stop after assembling a program.
2. Press program + until the selection you want to delete appears on
the display.
3. Press program – ; the display will turn off the green program LED
to indicate that the current track has been removed from the play-
list.
4. Repeat steps 3 and 4 for each selection you want to remove from
your program.
Deleting an Entire Playlist You may also delete an entire playlist at once:
1. Press stop after assembling a program (to avoid picking any par-
ticular track—you want to delete the entire program).
2. Press and hold program – for at least five seconds; the display will
turn off the yellow program LED to indicate that the playlist has
been deleted.
3. The CDD will display EP to indicate that is has Erased Program.