Proceed CDD - Manual (Page 6)

6
Unpacking and Placement
Unpacking the CDD Unpack your CDD Compact Disc Drive and remove all accessories from the car-
ton.
Important! Keep all packing materials for future transport of your CDD.
Shipping your new component in anything other than its
purpose-designed packing material may result in damage
that is not covered by the warranty.
Remove the Transport Screws Place the CDD Compact Disc Drive upside-down on a soft, clean surface. Remove
the transport screws from the bottom of the unit and save them with the packing
materials for future use.
Warning! The transport screws must be removed before operating the
CDD, since they immobilize the transport mechanism during
shipping to prevent damage. These screws must also be
replaced before shipping the unit.
Placement of the CDD The CDD should be placed as close as possible to your digital audio processor,
thus keeping interconnect cabling reasonably short. It may be placed on a shelf
or in a cabinet where it is convenient to operate.
Drawings are included in this manual to facilitate special installations and custom
cabinetry (see Dimensions).