TabletKiosk Sahara NetSlate a230T - Manual (Page 18)

Chapter 01: Getting Started 3
To Remove the Battery Pack
Turn off the Sahara NetSlate and remove the power cord from
the “DC Power In” port. Turn over the tablet and place it on a
solid, clean flat surface. Slide the locking tab in the direction of
the arrow engraved on the tab to set it in the unlock position.
Use your other hand to slide the battery release latch in the
direction of the arrow engraved on the tab and hold it there.
Use both hands to carefully side the battery out of the bay.
Step 2: Connecting the Tablet PC to an External Power Source
Locate the AC adapter and the power cord. Plug the power cord
securely into the AC adapter. Plug the AC adapter’s connection
cable into the “DC Power In” port on the top of the tablet. Once
the adapter plug is securely in place, plug the power cord into an
external power socket.
NOTE: When you first connect the tablet into an external power
source, the battery charge indicator will begin to glow amber. When
the battery is fully charged the indicator will turn green. See the
section entitled Battery Care for tips on maximizing battery life and
performance.
Removing the battery pack
Inserting the battery pack