TabletKiosk Sahara NetSlate a230T User Manual
Page 76
Chapter 06: Upgrading Your Sahara NetSlate
61
Your Sahara NetSlate comes pre-configured with a HDD that is
easy to upgrade. Before installing a new hard drive, however, be
sure to back up all of the files on your existing drive.
Refer to the following instructions and illustrations for informa-
tion on how to upgrade your computer’s HDD. Be sure to follow
the procedures in the previous section entitled Before you Begin
ANY Upgrade Procedure.
1. Turn off your computer,
turn it over and place it
face down on a solid, flat
surface. Be careful not
to place it on something
rough that could damage
the display screen.
2. With the battery removed,
look inside the battery
compartment and you will
see a black plastic strip
sitting next to a metal tab
held in place by a single
screw. Remove the screw
from the metal tab and
place it somewhere safe.
3. Take hold of the plastic
HDD release strip and
gently pull the HDD out of
its compartment as shown
in the illustration. You
might have to gently move
the drive slightly side to
side at first to work it out
of the SATA and power
ports.