Televes High Definition TV Satellite Receiver, zAs HD SAT - Manual (Page 4)

4
High Definition TV Satellite Receiver
1. Safety recommendations
¡ Read carefully this manual before attempting to install or handle this
receiver !
The ZAS HD SAT just purchased has been manufactured according to international
safety standards.
Dispose of electronics you no longer need in a friendly environment and in
accordance with relevant regulations.
We recommend you read the following safety tips.
POWERING:
Mains adapter 230V~ / 12V .
This adapter becomes the means to switch off the receiver.
The mains socket that is going to be used to connect the equipment should
be located nearby and should be easily accessible
OVERLOADING:
Do not overload sockets, extensions or adapters to avoid the risk of fire or
electric shock.
LIQUIDS:
The equipment must not come into contact with water or even be splashed
by liquids. Do not place containers with water on or near the equipment if it
is not adequately protected.
SMALL OBJECTS:
Avoid proximity of small metallic objects. They may enter the slots or
connectors on the receiver and cause serious damage.
CLEANING:
Do not attempt to clean the receiver without first unplugging it.
Do not use liquid, abrasive, solvent or aerosol cleaners to clean the receiver, it
may be damaged. Just make use of a soft cloth slightly moistened with water.
VENTILATION:
Place the receiver in a well ventilated area without blocking the vents.
Avoid exposure to sunlight, heat or flame.
Do not place other equipment on the receiver.
CONNECTIONS:
Make connections only recommended to avoid possible damage
LNB CONNECTION:
Unplug the receiver before connecting or disconnecting the LNB.
COULD OTHERWISE DAMAGE THE LNB.
TV CONNECTION:
Unplug the receiver before connecting or disconnecting the TV set.
COULD OTHERWISE DAMAGE THE TV SET.
LOCATION:
Place the receiver in a room inside, protected from shock, rain or direct
sunlight.
> 80 %
> 45 ºC
< -5ºC