Argox Ethernet printer - Manual (Page 30)

Ethernet Printer Technical Manual November 10, 2010
30
8. Reset Ethernet Card
When IP address setting is complete, the user must restart the printer to check the IP address on the
webpage. If the printer cannot get the correct IP address, please reset or
reboot the Ethernet Card.
Model
Reset
Procedure
OS-2130DE X-2300E
X-3200E A-2240E
CP-2140E
1. Remove all the printer covers.
2. Turn on the printer, and then
press the Ethernet card RESET
button for 2 seconds.
3. Restart the printer.
1. Turn on the printer, and then
press the Ethernet card
RESET button for 2 seconds.
2. Restart the printer.