Argox Ethernet printer - Manual (Page 44)

Ethernet Printer Technical Manual November 10, 2010
44
The format of the printer status or the error code response through SNMP are as follows:
This format has 8 bytes. (0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00)
HEX Error message description
0x01 Power on
0x02 Media out
0x03 Ribbon out
0x04 Printer busy
0x05 Pause error(peeler pause)
0x06 Memory overflow
0x07 Cutter fail
0x08 TPH open
0x09 TPH too hot
0x0a~0x2f Argox define
0x30~0x7F User define
0x80~0xFF Other define
Example 1:
If the media out occurs and the printer responds “0x01 0x01”; that indicates 1
media out error has occurred.
Example 2:
If the TPH is too hot and it is opened at the same time, the printer responds
“
0x02,0x08,0x09 ”; that indicates 2 errors have occurred. The errors are TPH
too hot and TPH open.