Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 120)

EMBROIDERY APPLICATIONS
E-54
f
Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.
Sewing Split Embroidery Patterns
Split embroidery patterns created with Palette
Ver.7 or later can be sewn. With split embroidery
patterns, embroidery designs larger than the
embroidery hoop are divided into multiple
sections, which combine to create a single pattern
after each section is sewn.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the Instruction manual included with Palette Ver.7
or later.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
* For details on recalling patterns, refer to “Selecting
Patterns from Embroidery Cards” on page E-7,
“Recalling from USB Media” on page E-50, or
“Recalling from the Computer” on page E-51.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section to be embroidered.
* Select the sections in alphabetical order.
* A maximum of 12 sections can be displayed in one
page. If there are 13 or more sections in the pattern,
press or to display the previous or next
page.