Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 45)

BEFORE EMBROIDERING
G
ettin
g R
ea
d
y
Basic operations B-43
B
1
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
BEFORE EMBROIDERING
Step 7
Step 2
Step 1
Step 3, 8
Step 9
Step 4, 5
Step 6
Step # Aim Action Page
1 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. B-31
2 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. E-11 to
E-17
3 Pattern selection Turn the main power to ON, and select an embroidery pattern. E-3
4 Checking the needle Use needle 75/11 for most embroidering. B-50
5 Embroidery foot attaching Attach embroidery foot “W+” with LED pointer. B-46
6 Embroidery unit attaching Attach the embroidery unit. B-44
7 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. E-17
8 Checking the layout Check and adjust the size and position of the embroidery. E-19
9 Embroidery thread setup Set up embroidery thread according to the pattern. E-21
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).