Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 13)

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
B-11
Operation Buttons
a “Start/Stop” button
/
Press this button to begin embroidering. The button changes
color according to the machine’s operation mode.
b “Needle Position” button
Press this button to raise or lower the needle.
c “Thread Cutter” button
Press this button after embroidering to automatically trim the
excess thread.
d “Presser Foot Lifter” button
Press this button to lower the embroidery foot and apply
pressure to the fabric. Press this button again to raise the
embroidery foot.
e “Automatic Threading” button
Use this button to automatically thread the needle.
Green: The machine is ready to embroider or is
embroidering.
Red: The machine cannot embroider.
CAUTION
• Do not press the thread cutter button after the
threads have been cut. The needle may break
and threads may become tangled, or damage
to the machine may occur.