Baby Lock Maria (Previous Model) (BL23A) Instruction and Reference Guide - Manual (Page 13)

12
• Connecting the Machine to the Power
Supply
Before connecting the power, make sure the volt-
age and frequency of your electrical power
conform to the machine.
Make sure the power switch is in the “ OFF ”
position. (“ “).
Insert the nonreversible plug into the machine
socket and plug the machine into the electrical
outlet.
Then turn the power switch “ON”.
Caution:
Do not place anything on the foot control, otherwise
the machine will start advertently.
Operating Instructions:
The symbol “ ” of a switch indicates the
“OFF” position of a switch.
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of an
electric shock, this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
modify the plug in any way.
“Foot Controller Model YC-482J-1 or TJC-150
is used with Sewing Machine Model BL23.”
Foot control
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster
the machine runs.