Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 109)

Appliqué, Patchwork and Quilt Stitching
Sewing S-33
U
T
IL
ITY S
T
IT
CH
ES
S
a
Slide the feed dog position switch, located at the rear
of the machine on the base, to
(to the left as seen
from the rear of the machine).
1 Feed dog position switch (as seen from the rear of the
machine)
→ The feed dogs are lowered.
b
Select .
c
Remove the presser foot holder (see the “Basic
operations” section) and the screw.
d
Position the free motion echo quilting foot “E” on the
left side of the presser bar with the holes in the quilting
foot and presser bar aligned.
e
Tighten the screw with the included screwdriver.
f
Using the measurement on the quilting foot as a guide,
sew around the motif.
1 6.4 mm (approx. 1/4 inch)
CAUTION
• With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
Memo
• On models equipped with the free motion sewing
mode, the presser foot can be adjusted to the
best height for free motion sewing. For details,
refer to “Sewing with free motion mode” in the
“Basic operations” section.
a
CAUTION
• Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.