Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 49)

Sewing
Basic operations B-39
ST
AR
TI
NG
T
O
SEW
B
d
Press (Reverse stitch button) or (Reinforcement
stitch button).
1 Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
The operation performed when the button is pressed differs
depending on the selected pattern. Refer to the following table
for details on the operation that is performed when the button
is pressed.
* If “Reinforcement Priority” on page 3 of the settings screen
is set to “ON”, reinforcement stitches are sewn instead of
reverse stitches.
Memo
• To turn off the automatic reinforcement stitching
function, press again, so it appears as .
Reverse stitch
button
Reinforcement
stitch button
When the automatic
reinforcement
stitching function is
not active while
selecting utility
stitches like
examples shown
below Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
Reverse stitch
button. Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
When the automatic
reinforcement
stitching function is
not active while
selecting utility
stitches like
examples shown
below Machine starts
sewing the stitches
and only sews
reverse stitches
while holding the
Reverse stitch
button.* Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
When the automatic
reinforcement
stitching function is
active while selecting
utility stitches like
examples shown
below Machine sews
reverse stitches at
the beginning and
end of sewing. Machine sews
reverse stitches at
the beginning and
reinforcement
stitches at the end of
sewing.
When the automatic
reinforcement
stitching function is
active while selecting
utility stitches like
examples shown
below Machine sews
reinforcement
stitches at the
beginning and
reverse stitches at
the end of sewing.* Machine sews
reinforcement
stitches at the
beginning and end of
sewing.
When the automatic
reinforcement
stitching function is
not active while
selecting character/
decorative stitches Machine starts
sewing and then
sews reinforcement
stitches while
holding the Reverse
stitch button. Machine starts
sewing at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.
When the automatic
reinforcement
stitching function is
active while selecting
character/decorative
stitches Machine sews
reinforcement
stitches at the
beginning and sews
reinforcement
stitches when the
Reverse stitch
button is pressed. Machine sews
reinforcement
stitches at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.
Reverse stitch
button
Reinforcement
stitch button