Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 159)

Embroidery Applications
Embroidering E-19
EM
BRO
ID
ER
Y
E
■ 2. Sewing the appliqué position on the base
fabric
a
Attach stabilizer material to the wrong side of the
fabric for the appliqué base.
Hoop the fabric in the embroidery frame, and then
attach the embroidery frame to the embroidery unit.
b
Thread the machine with the embroidery thread, lower
the presser foot lever, and then press the “Start/Stop”
button to sew the appliqué position.
→ The position of the appliqué is sewn, and then the
machine stops.
1 Position of applique
2 Base material
c
Remove the embroidery frame from the embroidery
unit.
■ 3. Affixing the appliqué piece to the base
fabric
a
Lightly apply craft glue to the back of the appliqué
piece, and then attach it to the base fabric within the
outline of the position sewn in step
b
of “2. Sewing
the appliqué position on the base fabric”.
b
After the appliqué piece is attached, attach the
embroidery frame to the machine.
Thread the machine with the embroidery thread, lower
the presser foot lever, and then press the “Start/Stop”
button to sew the appliqué.
→ The appliqué piece is sewn to the base fabric, and
then the machine stops.
Note
• Do not remove the base fabric from the
embroidery frame until all sewing is finished.
Note
• If the appliqué piece is not securely attached to
the base fabric, the appliqué piece may lift off
the base fabric during sewing, causing
misalignment.
• If the appliqué piece cannot be attached to the
base fabric with craft glue, securely baste it in
place with basting stitches.
• If thin fabric is used for the appliqué piece,
reinforce and secure it in place with an iron-on
adhesive sheet. An iron can be used to attach
the appliqué piece to the appliqué location.
• Before attaching the appliqué piece to the base
fabric, do not remove the fabric from the
embroidery frame.
Memo
• Depending on the pattern that is selected,
(APPLIQUE MATERIAL),
(APPLIQUE POSITION) and
(APPLIQUE) for all three steps may
not appear. If (APPLIQUE) appears
as a color, embroider using thread of that color.