Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 127)

Sewing Stitch Patterns
Decorative sewing D-5
CHA
R
A
C
T
ER
/ DE
CO
RA
T
IVE
ST
IT
C
H
ES
D
f
Press (Reverse stitch button) or (Reinforcement
stitch button) to sew reinforcement stitches. Making adjustments
Your stitch pattern may sometimes turn out poorly, depending
on the type or thickness of fabric, the stabilizer material used,
sewing speed, etc. If your sewing does not turn out well, sew
trial stitches using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the pattern
does not turn out well even after making adjustments based
on the pattern described below, make adjustments for each
pattern individually.
a
Press and select the following pattern on 14/16.
b
Attach monogramming foot “N” and sew the pattern.
c
Compare the finished pattern to the illustration of the
correct pattern below.
Memo
• When sewing character stitches, the machine
automatically sews reinforcement stitches at the
beginning and end of each character.
• When sewing is completed, trim any excess
thread between letters.
Note
• When sewing some patterns, the needle will
temporarily pause in the raised position while the
fabric is fed due to the operation of the needle
bar separation mechanism which is used in this
machine. At such times, a clicking sound
different from the sound generated during
sewing will be heard. This sound is normal and is
not the sign of a malfunction.
Note
• Be sure to use monogramming foot “N”.
Adjustments may not be made correctly with any
other presser foot.