Basler Electric IDP-800 - Manual (Page 30)

24 9437600990 Rev F
Figure 27. DECS Control Screen
Setpoint Control
Pressing the Setpoint Control button accesses the Setpoint Control screen (Figure 28). This screen
displays the DECS-400 AVR, FCR, power factor, and var setpoints and provides two methods of setpoint
adjustment. The “+” and “–“ buttons can be pressed to increment and decrement the active setpoint. A
specific setpoint can be entered for any of the four setpoints. Pressing the New button associated with the
setpoint can be entered for any of the four setpoints. Pressing the New button associated with the
setpoint to be changed accesses a Setpoint Adjustment screen that displays the current setpoint value
along with the minimum and maximum limits for the setting. Touching the setting field area displays a
numeric keypad where the new value can be entered.
The Setpoint Control screen also has system status indicators and a metering display for generator and
excitation system parameters.
Figure 28. Setpoint Control Screen
IDP-800-B Operation IDP-800