Burst Electronics HDLG - Manual (Page 32)

GPI Setup; Mode = ?; Crtl = ? –This button opens the HDLG Scheduler Mode & GPI Control
Setup. Mode and Ctrl settings are made here. (See Figure 13)
(Figure 13)
Mode = 1 – Scheduler: Front panel controlled
GPI: Disabled (Default)
Mode = 2 – Scheduler: Front panel disabled
GPI: Controls Scheduler.
Mode = 3 – Scheduler: Front panel controlled
GPI: Overrides scheduler with Logo ON
Mode = 4 – Scheduler; Disabled
GPI: Sequences through Logos 1-2-3-4-1
Mode = 5 – Scheduler: Front panel controlled
GPI: Forces Logo 4 ON
Ctrl = 1 – GPI active when closed
Ctrl = 2 – GPI active when open
Ctrl = 3 – Pushbutton (Pos Edge)
Ctrl = 4 – Pushbutton (Neg edge)
SAVE & UPDATE – Saves the selections made to the HDLG hardware. Otherwise it saves
HDLG HD/SD SDI Logo/Color Bar Generator 31