Burst Electronics HDLG - Manual (Page 37)

logo scheduler.
EXT Clock – The External Clock is a 1pps reference to synchronize the HDLG’s internal clock.
Burst Electronics Inc has used the Tiny Tools Time Sync Plus from Broadcast Tools, Inc.
(www.broadcasttools.com) to input 1pps.
GPI Input – The GPI Input can be a TTL low or a TTL high to trigger the GPI. The setting on
the GPI Mode Setup should be configured to accept the proper TTL Condition. (See Figure 10)
Specifications
Power: 9 to 15 volts DC at 250mA (Polarity insensitive) or via 120 volt AC to 12 volt DC
converter (included with the HDLG).
Size: 5.6W x 1.5H x 7.3D inches.
Video: Input – SD/SDI or HD/SDI, SMPTE 259M,SMPTE 274M, SMPTE 296M
Output -- Generate Mode 1080i/60, 720p/60 Digital Color Bars.
Logo: 16 million color (24-bit) LOGOS, 512 pixels wide by 512 pixels high.
Storage: Up to 4 logos
Interface: USB2.0
Accessories: 3 foot USB2.0 cable
Program/Driver Installation Disk
120Vac – 12Vdc wall module
Mated pair for GPI/Clock connector
HDLG HD/SD SDI Logo/Color Bar Generator 36