Code Blue IP1500 VOIP SPEAKERPHONE - Manual (Page 37)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-137-E page 37 of 66
IP1500 and IP2500 Series
Administrator Guide
Action Script Configuration
Action Scripts are based on Hardware Settings made earlier in the setup process. For example, if
your speakerphone has two physical buttons and only one button was selected in Hardware Set-
tings “Interface” “Button Count” some scripts choices will be missing.
Scripting Requirements
The Action Script in the speakerphone can be very extensive, yet only if all the correct features are
enabled. Understanding all the abilities of the phone is required, only then can the user configure
the speakerphone for maximum functionality.
Numbers
Load phone numbers for all of your planned calls from this speakerphone.
Recordings
Record all message and upload them to this speakerphone.
Hardware Settings
Ensure the speakerphone features are represented in the Hardware Settings portion of the GUI.
Diagnostic Settings
When using remote monitoring services, for example SNMP Server service or Code Blue’s ToolVox
Server w/UPD application, the speakerphone will send SNMP traps or use the “Action Scripts” to
generate calls to a monitoring service and play pre-recorded messages as a notification an issue
has been detected.
SCRIPTING BASIC CALL
The speakerphone has GUI interface for building scripts. Scripting can consist of a single action or
combination of actions related to a button press or Auxiliary Output Trigger alone.
• Click on Action Scripts under Code Blue (see far left-hand column) to program the action
scripts you wish the unit to
perform during button activa-
tion or diagnostic condition.
• To program, select a Button
or Diagnostic condition from
the option list by clicking on
the down arrow across from
Script for: For this example
select Button #1 Pressed.
• Click on Add Action.
(Continued on next page)