Continental Fireplaces CDVS600 User Manual

Page 34

Advertising
background image

34

W415-0791 / C / 04.18.12

5.8.2 INSTALLING NATURAL VENT

Follow the instructions of the "B" vent manufacturer for
chimney installation.

A.

Remove the access plate. Remove and discard the
air intake cover plate located directly behind the
access plate.

B.

Feed the 2 wires, supplied, through the 7" collar at the
top of the unit, bring them out the air intake opening
but behind the rear panel as shown.

NOTE: Ensure that 2 female ends remain at the
top. Re-secure the access plate.

C.

Remove the spill switch bracket from the rear of the
adapter. Unscrew the spill switch and discard the
bracket. Attach the spill switch to the bracket supplied
with the appliance and secure onto the adapter.

D.

Bring the wires through the lower hole in the adapter.
To pass the wires through the hole more easily,
temporarily tape the two terminals together.

E.

With the spill switch opening aligned to the back of the
appliance, take hold of the adapter base and push the
crimped edge into the appliance fl ue collar.

F.

Connect the upper wire terminals to the spill switch.

G.

Disconnect the wire leads to on/off switch, see "WIRING
DIAGRAM" section and reconnect to the ends of the spill
switch wires. Leave all excess wire in an orderly manner.

This appliance needs air for safe operation and must be installed in such a way that adequate combustion air
is available.

5.8.3 NATURAL VENT

Attach the natural vent label, shown, in the control area of the appliance.

AIR INTAKE COVER
PLATE LOCATION

ACCESS PLATE
LOCATION

SPILL
SWITCH

ADAPTER

5.8.4 COMBUSTION AIR

ATTACH THIS LABEL IN THE CONTROL AREA OF THE APPLIANCE.

THIS APPLIANCE HAS BEEN CONVERTED TO A NATURAL VENT

MODEL.

ATTACHEZ CET ETIQUETTE DANS LA REGION DE CONTROLE DUE FOYER.

CET APPAREIL A ÉTÉ CONVERTI À UN MODÈLE À TIRAGE

NATUREL.

A / W385-0160

For aesthetics, the adapter has been designed to accept a standard
matte black 7" appliance pipe and the Continental® decorative brass
band (standard with the GS-150KT). Both are available from your
local authorized dealer / distributor.

Advertising