Cybex 525AT Arc Trainer User Manual
Page 42
Advertising
42
43
Cybex Service Manual
Tilt front end assembly forward
Tilt front end assembly forward carefully until it stops.
Tilt
Forward
Remove front access cover
1. Remove both lower and upper screws securing front access cover using a Phillips screwdriver.
1
3
2
Description
1
Upper screw (2)
2
Front access cover
3
Lower screw (2)
2. Remove the front access cover.
Remove left linkage rod
1. Remove SHCS, flat washer, cap and spacer securing linkage rod using a 3/16” Allen wrench.
2
3
4
1
5
Description
1
Spacer
2
SHCS
3
Flat washer
4
Cap
5
Linkage rod
2. Place linkage rod down on frame. Place a cloth in between linkage rod and frame to prevent
scratches.
Advertising