Cybex 525AT Arc Trainer - Manual (Page 66)

66 67
Cybex Service Manual
4. Unplug optional iPod cable. The iPod cable is held in place by a notch in the access cover.
A. Press in both side latches of the cable connector.
A
B
C
DO NOT PULL
CONNECTOR OUT
BY THE WIRES!
B. Ensure the latches disengage from the connector.
C. Unplug cable by holding down the latches on both sides and pulling straight out from the
connector. Do not pull on wires, remove by connector.
Remove MCC board
Remove the four screws securing the MCC board to the bezel using a Phillips screwdriver.
1
2
3
Description
1 Bezel
2 MCC board
3 Screws (4)
Install new MCC board
Install the four screws securing the new MCC board to the bezel using a Phillips screwdriver.