Cybex 525AT Arc Trainer - Manual (Page 63)

63
Cybex Service Manual
Complete installation
1. Screw the coax cable into the E3 View Monitor.
2. Install the ground cable to the E3 View Monitor using a 11/32” nut driver.
3. Plug optional CSAFE cable into the MCC board.
4. Plug cables into the MCC board.
MCC board cables
1 2 3
5 6 4 7 8 9
Description
1 CSAFE (optional)
2 Display
3 E3 View monitor
4 A/V
5 Headphone jack
6 iPod (optional)
7 Heart rate
8 Handset membrane
9 iPod board assembly (optional)
Install front cover
Install the four screws securing the front cover to the console assembly using a Phillips screwdriver.
2
1 Description
1 Console assembly
2 Screws (4)