Cybex 525AT Arc Trainer - Manual (Page 48)

48 49
Cybex Service Manual
2. Install the upper and lower screws using a Phillips screwdriver. Do not over tighten screws.
Test unit for proper operation
1. Plug the power cord into the power outlet.
2. Operate the unit at all levels to verify proper operation.
Accessory Tray
Tools Required
Phillips screwdriver (regular and stubby)
Remove accessory tray bottom
1. Remove the three screws securing the accessory tray bottom to the accessory tray base using
a Phillips screwdriver.
4
3
2
1
Description
1 Accessory tray bottom
2 Accessory tray base
3 Screw
4 Screws (2)
2. Remove the accessory tray bottom