Daktronics All Sport 100 Contro - Manual (Page 13)

Section 3: Basic Operation
3.1 Console Operation
The console face consists of a two-line-by-16-character liquid crystal display and a sport-
specific keyboard insert. In most cases, the top line of the LCD shows the main clock time, the
direction the clock is counting and when the main horn is sounding. Generally, the bottom
line of the LCD displays the home and guest team scores.
Throughout this manual, the names or letters of keys on the keyboard are enclosed in angle
brackets (such as <ENTER*>). Keys and functions common to all sports are explained in
Section 3.5. All of the keys that pertain to a specific sport code insert are explained in detail
in the section of the manual for that specific sport.
3.2 All Sport
®
100 Inserts and Codes
Reference Drawings:
Insert; A/S 100 Clock/Score Code-01 .................................................... Drawing A-167854
Insert; A/S 100 Insert; Baseball ............................................................. Drawing A-184219
Insert; LL-2648 Segment Timer Code-06 .............................................. Drawing A-274996
Sport inserts are used to allow a single console to control multiple sports. Select the proper
insert from the chart below and slide it into the insert opening, on the left side of the console,
until it stops. To remove a sport insert, pull on the tab that extends from the left side of the
console. The insert will easily slide out.
Figure 5: All Sport 100 Insert LL-2648
The All Sport 100 uses two different keypad
inserts to program game time,
segment/practice timing, game score and
bonus and possession information into
Daktronics BB-114 portable basketball displays.
Segment timing is controlled by sport insert
LL-2648, and all other data is entered using
sport insert LL-2550.
Figure 5 at right illustrates one AS-100 insert
used to control the displays. For more details
on the inserts, refer to the All Sport 100 insert
drawings, Drawings A-167854, and A-274996,
located in Appendix A: Reference Drawings.
If an insert is lost or damaged, a copy of the
insert drawings are located in Appendix A:
Reference Drawings can be used until a
replacement is ordered.
Basic Operations 9