Daktronics All Sport 100 Contro - Manual (Page 6)

All references to drawing numbers, appendices, figures, or other manuals are presented in
bold typeface, as in this example: “Refer to Drawing A-66945 for the location of the driver
enclosure.” Additionally, any drawings referenced within a particular subsection are listed at
the beginning of that subsection in the following manner:
Reference Drawing:
Segmentation, 7 Seg Bar Digit ................................................................ Drawing A-69945
Daktronics identifies manuals by their engineering document (ED) number, which is located
on the cover page of the manual. For example, this manual would be referred to as ED-13432.
The serial and model numbers of a Daktronics scoreboard can be found on the ID label on the
display. The label will be similar to the one shown in Figure 2. When calling Daktronics
Customer Call Center, please have this information available to ensure quick service. For
future reference, note the scoreboard model number serial number, and installation date on
the second page of this manual.
Figure 2: Scoreboard ID Label
Daktronics displays are built for long life and require little maintenance. However, from time
to time, certain display components will have to be replaced. The Replacement Parts List in
Section 2.3 provides the names and part numbers of components that may require replacement
during the life of this display.
Following the Replacement Parts List is an explanation of Daktronics Exchange and Repair and
Repair Programs. Refer to these instructions if replacement components or repair is needed.
2 Introduction