Daktronics All Sport 100 Contro - Manual (Page 5)

Section 1: Introduction
1.1 How To Use This Manual
Important Safeguards:
1.
Read and understand these instructions before installing the display.
2.
Do not drop the control console or allow it to get wet.
3.
Properly ground the scoreboard with a grounding electrode at the scoreboard
location.
4.
Disconnect power when the scoreboard is not in use.
5.
Disconnect power when servicing the scoreboard.
6.
Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
Figure 1 illustrates the
Daktronics drawing
numbering system.
Daktronics identifies
individual engineering
drawings by their drawing
number (7087-P08A-69945
in the example), which is
located in the lower right
corner of the drawing. This
manual refers to drawings by their last set of numbers and the letter preceding them. The
example would be Drawing A-69945.
Reference drawings are grouped and inserted in alphanumeric order in the Appendix.
Listed below are a number of drawing types commonly used by Daktronics, along with the
information that each is likely to provide.
Figure 1: Daktronics Drawing Label
ƒ System riser diagrams: overall system layout from control room to display,
power and phase requirements
ƒ Shop drawings: fan locations, transformer locations, mounting information,
power and signal entrance points and access method (Front or rear)
ƒ Schematics: power wiring, signal wiring, panelboard or power termination
panel assignments, signal termination panel assignments and transformer
assignments
ƒ Final assembly: component locations, part numbers, display dimensions and
assembly/disassembly instructions
Introduction 1