DFI RL830-C602/C604 - Manual (Page 12)

www.dfi.com
12
Chapter 2 Hardware Installation
Chapter 2
Important:
The CPU will fit in only one orientation and can easily be inserted without exerting
any force.
The CPU’s notch will at
the same time fit into the
socket’s alignment key.
8. Close the load plate then
push the load lever down.
9. Hook the load lever under
the retention tab.
Load lever
Retention
tab
Retention
tab
Load lever
Alignment key
Alignment key
7. Insert the CPU into the
socket. The gold triangular
mark on the CPU must
align with the corner of
the CPU socket shown on
the photo.
Gold triangular mark