Digi-Star GT460 - Manual (Page 13)

ID Screen
ID SCREEN
• Auto Load Preset (ALP – D.A.N. 477) must not be set to OFF.
• ID names can be uploaded from a PC using a USB drive. See page
15.
• ID names and capacities can be a maximum of 6 characters long.
• ID names can be changed by using the keypad before unloading.
• ID Screen has two columns with ID on left and capacity on right of 3 line
display
1
Press to modify or select ID name. Current ID number is shown
in upper display.
2
Three lines are displayed in Lower Display Window. The top line of the
three is current, editable and will be used for next data record.
3
Up/Down Arrows – Press or to scroll through ID names (150 max.).
Hold arrow to scroll faster. Use or to move cursor within data line.
4
Use keypad to enter or update ID names. Press to delete
characters to left and to delete the selected character. Hold
to delete entire line. Pressing will reset line to last saved
name.
5
To use special characters press and release . Then press key with
desired special character. Repeat for each special character required.
T r u c k I 2 0 5 0 0
T r u c k 2 2 5 0 0 0
T r u c k 3 2 5 0 0 0
I D i
2
3
4
5
6
1
1
4
4
7
D3804 GT460 AutoLog
2
Operators Manual 13