Digi-Star GT460 - Manual (Page 21)

AutoLog2
1. Enter 406
2. Press to change the RELAY
function.
3. Press to store.
The RELAY function defines what
function the GT460 performs when
the preset weight is activated during
the unloading process. This can be
held at 12 VDC while the preset is
active (PREACT), or activate 12
VDC once the preset weight is
reached during unloading
(PRNOPA).
1. Enter 475
2. Press
3. Enter time for PAST setting, if
needed.
4. Press to store.
The PAST setting is the time (0.0 to
99.9 seconds) for the RELAY
function to timeout. If RELAY is set
as PREACT and is held at 12 VDC
output during the entire unload
process, this setting extends the
time at which the relay remains at
12 VDC output. If RELAY is set as
PRNOPA and activates 12 VDC
output at the end of the unload
cycle, this setting determines how
long the output stays on after the
target weight is reached.
1
2
3
1
2
3
4
D3804 GT460 AutoLog
2
Operators Manual 21