Digi-Star GT460 - Manual (Page 18)

Operation
Record Data – Manual Mode (Without AutoLog
2
)
Note: If the GT460 is not fitted with a PTO shaft speed sensor the Indicator
must be operated in the Manual mode. See pages 31-34.
When the unloading process is
complete:
• The data record is stored in
memory.
• The data record is printed.
• The data record screen will
display the last data record for
10 seconds.
The indicator will return to active
screen.
1. Press to select required
field name. See page 12.
2. Press to select required
ID. See page 13.
Note: Make sure Indicator has
returned to the active screen.
3. Press before unloading grain
from cart. Scale will read Zero
and enter the net mode.
4. Unload grain from grain cart. The
Upper Display shows the amount
unloaded. Gross value (total
amount left on cart) is displayed
on second line of Lower Display.
5. Press once the unloading
process is complete.
Recorded Data Preview
1. Press to see last data
record.
2. Press or to scroll record
data.
3. Press to immediately return
to the active screen. After 10
seconds of no keypad activity,
the Indicator will return to the
active screen.
1
2
J on e s hi l l corn
I 2 34 n e
P A- I 5 64 7 2
I d 6 3/ I 6/ 09 6 2 : 2 3A
L I 5 3
3
Truck I TIME-3:33P
G- 49,340 PA-97,380
J o n e s h i l l c o r n
0
1
2 3
4
5
18 GT460 AutoLog
2
Operators Manual D3804