Flowserve StarPac 3 - Manual (Page 12)

StarPac Intelligent Control System FCD VLENIM0066-05 04/14
12
®
Table V: Physical Specifications
Housing Material
powder painted aluminum stainless steel
Soft Goods Buna-N
Weight 10.3 pounds ( kg) aluminum 26.5 pounds ( kg) stain-
less steel
Pressure Sensor 316 L stainless steel
Pressure Sensor Over-range Two times maximum operating pressure with negligible change in output
Pressure Sensor Seals
Viton, Kalrez, EPDM O-rings PTFE, Spiral Wound Gaskets
Tubing 316 stainless steel with Swagelok® fittings
Table VI: Positioner Specifications
Deadband
<0.1% full scale
Repeatability <0.05% full scale
Linearity <0.5% (rotary), <0.8 (sliding stem) full scale
Air Consumption <0.3 SCFM (0.5 Nm3/hr) @ 60 psi (4 barg)
Table VII: Measurement Repeatability
Flow
0.25% full scale
Pressure (max.) 0.1% full scale
Temperature 1° C body temperature measured by Type K thermocouple
Drift 1% full scale / 6 months
Calibration Independent zero and span adjustment for all sensors
Table VIII: Hazardous Area Certifications
Explosionproof / Flameproof Nonincendive/Div 2
Class I, Div 1, Groups B,C,D
Class II, Div 1, Groups E,F,G
Class III
With Non-Incendive Outputs
T6 Max ambient 75
0 C
Class I, Div 2, Groups A,B,C,D
Zone 2, Ex nIIC
FM
APPROVED