Flowserve StarPac 3 - Manual (Page 54)

StarPac Intelligent Control System FCD VLENIM0066-05 04/14
54
®
22 StarPac 3 Stainless Steel Tubing Kits
Figure 27: StarPac 3 Temperature Sensor, Flush-mount Version
Temperature probe boss
1 2 3
1. Temperature probe.
2. Tubing, 0.035 wall
3. Tube fitting
Table XXIX: 316 Stainless Steel Tubing
Description Number
Pressure sensor wire tubing (0.50-inch diameter 0.035-inch thick) 063200.150.000
Extended temperature wet leg tubing (0.50-inch diameter 0.065-inch thick) 083565.150.000
Thermocouple tubing (3/8-inch diameter, 0.035-inch thick) 007537.150.000
NOTE: On remote mount pressure sensor configurations, the wet-leg tubing must have a wall
thickness of 0.065” or 0.083” depending on the pressure/temperature of the process.